Show Off Your Shack – Rick Hughes


Learn how to Show off your shack! – read more

Shack Owner: Rick Hughes
From:  Colcord, Oklahoma in the NE part of the state. 75 mi east of Tulsa.
Call Sign:  KB5RTE – General Class Amateur Radio (Ham 21 Years)
Equipment: Uniden HomePatrol-1 and Yaesu FT-8800

I mostly listen to Public Service bands, local law enforcement, fire departments and of course amateur radio repeaters. I ap registered as a Skywarn Spotter and do some local weather watching for a TV station in Tulsa on occasion

Learn how to Show off your Shack! – read more

Show off Your Shack! – Tony Raymond

Learn how to Show off your shack! – read more

Shack Owner: Tony Raymond
From:  Everett, Washington

Each May I go on a road trip of about 8k miles and I like to listen to Police Traffic along the way. the laptop tray allows me to have my laptop to control the scanner (installing preset files) and I can also control the scanner also with the remote head.

Learn how to Show off your Shack! – read more

Show off Your Shack! – Craig Cannon (KG6OBQ)

Learn how to Show off your shack! – read more

Shack Owner: Craig Cannon
Ham Call Sign:  KG6OBQ
From:  Northern California East Bay Area

Over three decades of TV News gathering, and even doing an occasional video shoot for our Government has made me a bit better at the radio installation science, since it all compliments each other. I carry in addition to all shown, a full compliment of broadcasting video gear. Yes, you may have imagined, three car alarms also. Some radios pictured include GRE PSR-600s Uniden 996xts with a couple of Bearcat Trunk Tracker 3 radios tossed in the mix. A rack of HAM rigs is missing as I had to position them in a new area, and am waiting for longer control cables. There is an older ICOM dual bander just out of view to the right. Normally, a square of plexiglas covers the radios in the center. This prevents accidental button pressing, creates an armrest, and keeps foreign matter off the radios. The goal in the near future, is to simply bring a laptop to the car, download frequencies into each radio via cable, and off I go.

Hurricane Katrina washed away my military contact information I’m guessing, so I have not had too many requests from the Feds to shoot video projects lately. It’s always been a dream of mine to have one of my vehicles, or myself and vehicle used as a prop, or extra in a motion picture! I just think that would be awesome! Maybe someday.

Craig Cannon
TV News Stringer
Northern California East Bay Area
craigcannonvideonewsreel.com

Learn how to Show off your Shack! – read more

Show Off Your Shack! – John Kashirsky

Learn how to Show off your shack! – read more

Shack Owner:
John Kashirsky
From:  Republic, MO
Ham Call Sign:  N0TDL

Monitors:  I mostly monitor Greene County, MO Public Safety and anything Weather! I am an Aux for the National Weather service in Springfield MO Via 2 Meter radio.

John’s Shack:
Radio Shack PRO-106
Radio Shack PRO-197
Radio Shack PRO-163
Uniden Bearcat BC895XLT
Icom PCR1000
ICom 2200H with D-Star
Kenwood TM261
Yaesu FT2800M

Learn how to Show off your Shack! – read more

Show Off Your Shack! – Cosimo DelRosso of Teaneck, NJ

Learn how to Show off your shack! – read more

Shack Owner:
Cosimo DelRosso
From: Teaneck NJCall Sign: N2KWE
In the hobby for:  35 years
Listen to:  I like to listen to everything. I live very close to NY and the harbors so I can hear it from ships to the Coast Guard, Police, Fire, EMS.  I also host a feed on Radio Reference for the Teaneck, NJ Police and fire in Bergen County.


Here is some of my Shack:

From bottom to top right rack 
Uniden BCD996T
Uniden BCT15X
Uniden BCT15X
Uniden BCD996XT

From top to bottom left rack
Uniden BCD996T
RadioShack PRO-160

Also have
GRE PSR-800 and  Uniden BC346XT
Realistic PRO-2006
Grundig Satellit 750
Alinco DJ-V5

Learn how to Show off your Shack! – read more

Show Off Your Shack! – Shawn Kurschner (Manitowoc, WI)

Learn how to Show off your shack! – read more

Shack Owner:
Shawn Kurschner
From: Manitowoc, WICall Sign: KC9AAH
In the hobby for:  18 years
Listen to: Primarily interested in Public Safety and Aviation Monitoring.

My station consists of :
ICOM
V8000
W32A

Uniden Bearcat
BC780XLT
BCD396XT

Radio Shack
Pro-2067
PRO-92
PRO-97

Realistic
PRO-2020

Regency Monitor Radio


Learn how to Show off your Shack! – read more

Show Off Your Shack! – Ken LaBelle (North Smithfield, RI)

Learn how to Show off your shack! – read more

Shack Owner: Ken LaBelle
(Fire/Rescue Captain Town of Lincoln, RI 15yrs on the job)
From: North Smithfield, RI
Owner: www.scanri.net
In the hobby for: 20+ years avid scanner listener
What does he like to listen to? Listen to mostly fire/ems but I do have local police.


Scanners
My scanners all have been purchased through Scanner Master. I have 6 Uniden 996t’s on my desk and a Motorola CDM 1250 UHF radio for fire buff club usage. One of the 6 scanners is dedicated for my website scanri.net. I use ProScan to stream to my followers on Radio Reference, ProScan, and the webserver site.

Antennas
The antennas are: (scanner) Antenna Specialist Mon-31, (UHF Radio) Comtelco 36” fiberglass 470-512, and there is a Ferret scanner antenna. (I am not using the Ferret at the moment due to it lacks reception in the UHF bands). The coax is all LMR400 with Amphenol connectors. The Mon-31 scanner antenna coax ties into a Stridsberg active 8-port multicoupler. I also have a Jim M75 pre-amp before the multicoupler that greatly increases my reception range. The UHF antenna connects to my remote mount Motorola CDM 1250 radio.

Multicoupler
The Stridsberg device connects to the 6 Uniden 996T scanners on my desk, a BC780 on my bedroom nightstand, and my Uniden 796d Scann
er Master remote-head edition. The brain of the 796d is in my attic near my office and the head is located in the living room of my house on an end table. A 50’ lead of CAT5 cable connects the two. The scanners in the Spectrum Force desk mounts have “T” connectors on the coax feeds to each. I did this to minimize runs of coax along my walls to the desk. The last 2 open ports on the multicoupler are capped off with a BNC terminator caps for future use.

In the Attic
You will see a tan box mounted on the attic mounting wallboard. This is the power supply for the house security cameras. I have a DVR on the desk for the cameras and it is also connected to the Internet via the router. I use the scanners to monitor for my hobby and to alert me for breaking news for my photography business NRI Fire Photos that can be found at www.nrifirephotos.com
.
Thanks for taking the time to view my “Shack”.

Ken

Learn how to Show off your Shack! – read more


Show Off Your Shack! – Scott Freiman (Tucson, AZ)


Learn how to Show off your shack! – read more

Shack owner: Scott Freiman
From: Tucson, AZ
In the hobby for: Over 35 years
What does he like to listen to? Police and SWL Broadcast

Shack consists of: (2) Uniden BCT15X scanners, Icom IC-R-75 receiver
(Also not pictured and spread throughout the house are a GRE PSR-700, Icom PCR-100 and several Uniden BC-3xx series scanners)


Learn how to Show off your Shack! – read more

Show Off Your Shack! – Bristol, RI Emergency Dispatch Center

Learn how to Show off your shack! – read more

In honor of National Public Safety Telecommunicators Week
(April 8-14, 2012) here is the Town of Bristol, RI “Shack”.

Name: Bristol Emergency Dispatch Center
Location: Bristol, RI
Submitted and written by:
Rick Giannini (Twitter @rickgiannini)

Frequencies:
Fire Dispatch – 154.14500 – PL 114.8
Police Dispatch – 155.13000 – PL 114.8

Our staff consists of 7 civillian employees employed by the PD. We dispatch for Police, Fire & EMS as well as Bristol Sewer Dept & DPW after hours. In addition, we monitor USCG due to the 12 miles of shoreline that Bristol has.
This center was upgraded with a $375,000 Homeland security grant in 2008. Our old center was 4′ wide by 12′ long and only had 1 computer and radio.
Looking at the photo you will see a wall mounted screen, that is the Internet which we monitor traffic cameras, weather, and hospital conditions.
The TV mounted in the corner is a closed circuit IP Camera 20-channel DVR which monitors cameras in town, Town beach, parks, landfill etc.
Under that you will see a bank of 6 computer monitors: One screen is our NCIC screen, under that is the Radio console, the 2 center and 2 left screens are the dispatch CAD, we use IMC by Tri-Tech, and also have it in our patrol cruisers. (This setup is mirrored on the right out of view for 2nd person to dispatch if needed) Both the video and keyboard tables are powered to raise or lower so that a person can stand or sit while working.
The radio screen is a GUI screen, the actual radios are in the sub-basement grounded with a copper cable, the safest place to be in town during a thunderstorm. The computer program is by Orbacom. Each icon is a “radio” which we can pull up to utilize, Police, Fire, Intercity PD & FD, we have 2 multi channel radios which monitor Coast Guard and surrounding communities as well as a UHF frequency. The program also has electro-magnetic door switches to allow us to remotely control access to the station, it has a full intercom throughout the building, as well as shutting off the water in the cell block. This program also allows us to “simulcast or patch” our frequency up to 7 times with other agencies if the need for a multi-jurisdictional response is ever needed.
The three screens to the upper right ate CCTV, Cable TV, CCTV for security reasons on the campus. We have 20 cameras on the PD which are recorded 24/7 on a DVR with a 65 day cycle before being overwritten.
Left Side
Left Side run down
  • DVD Recorder for prisoner movement
  • VHS/DVD for dispatch on Duty
  • 20 Channel Pelco DVR (Town Security CCTV IP Cams)
Radio Console

  • 4 Channel DVR (small grey unit, going to be replace)
  • 20 Channel CCT Switching Unit
  • 20 Channel Sount Recorder
  • 16 Channel DVR BPD CCTV
Right Side
Right Side run down

  • Digital Encrypted 800MHz Radio as Well as UHF Encrypted Radio (State EMA)
Radio Console

  • Kalatel Camera controller CCTV BPD Campus Cameras
Fire Control Panel

  • Keltron Fire control panel radio box head end receiver
    RI does not allow for new landline connections to local municipality for fire alarms
Back-up Systems
We have 6 computers with APC battery backups as well as a diesel powered generator which will power lighting and all computers, a natural gas fired generator is scheduled to be installed as a back-up. Our (4) 9-1-1 lines are hardwired to the wall, out of camera sight but trunk to the desk phones. We have 2 Cellular phones in the event of a service outage, we can forward our calls to these back ups. We also have an AED in Dispatch

(Photo from www.bristolri.us)

Bristol Mobile Command Center
We have a 65′ Mobile command center which can be deployed at key areas in town as a back up to dispatch with full capability of phone, fax, computer and radio in the event that the police station ever became incapacitated by disaster or other nature. We have a server and back-up on site, however, we also have a 100GB microwave uplink which updates a 3rd server located in another town building. The FD also has a dispatch center, however it is a computer and radio, with the Keltron Fire control panel. It serves as a tertiary dispatch center if needed, however the new fire station serves as the town’s EOC and was put into 24/7 use 2 months after opening due to a flood which brought the town to it’s knees 2 years ago. It was also used during Hurricane Irene, BFD took over dispatch for FD units and allowed the PD to focus on law enforcement.

I was in Worcester last year in a friend’s truck, we heard 2 BPD officers on the car-to-car freq setting up a radar post, also, our past Deputy heard us while he was in Boston by the Pru tower…. not a bad range!
We also installed a MUCH NEEDED ductless mini split AC unit to keep the comm center comfortable.
Learn how to Show off your Shack! – read more

Show Off Your Shack! – Bill Steffey (NY9H)


Learn how to Show off your shack! – read more

Name: Bill Steffey (NY9H)
Location: Prosperity, PA

In the hobby since:
1959 (with a HALLICRAFTERS S-95 VHF)

Like to listen to:
Anything and everything… Broadcasting from AM to 2.4 gHz

Equipment:
ICOM PC-1000
Winradio
Kenwood r1
ICOM R 100
RF Space sdr-IQ
2 Uniden BC780XLT in shack
ICOM R7000 30-1.3 gHz
UnidenBC796D in car with remote head
Uniden BC396T with remote head
kenwood tf6a handheld
Uniden HomePatrol HP-1 with GPS… quite cool on trips

Bill’s Shack!
Main rig changed Jan07 requiring massive cooling effort for the cabinet, with a 4“ exhaust vent mounted in the wall at the rear of the ICOM, going to the basement where an acoustically decoupled fan pulls the air. K2 is sccond rig. And TT Titan replaced by ACOM (remote on right) Now up to 3 LCDs.

The spectrum analyzer for the K3 is on the small touchscreen (4th vga) up on the shelf center… the microphone is barely visible, as it covers the Acom controller (above the K3)


New house in 1979 and into the closet with the hobby and the Apple II Computer on the right

I started in the basement and worked my way upstairs. Here is WN9MOV in my first house in Deerfield about 1976. In the basement , note the furnace directly behind/under the ham desk. My first attempt with a tilted radio shelf.. FT-101 with G3lll RF Clipper . and an ALLIED AX-190 , KW Tuner and for VHF I was a leader in broadband…notice the GLB synthe on the Regency HR2A… Lafayette VHF tunable radio & Hallicarfters CRx-2

Learn how to Show off your Shack! – read more