Scanner 101 – Programming the Uniden Bearcat BC125AT Scanner

Product: Uniden Bearcat BC125AT Scanner

Scanner 101 Topic: Manually programming the BC125AT Scanner without software.

———-

Here are the steps to programming a conventional frequency into BC125AT

Step 1
Press Hold Button and Press the channel number you want to program then hit hold again.

Step 2
Press “Func” (Orange Button) then hit “Pgm E” button.

Step 3
“Enter Frequency” will be highlighted press “Pgm E” button.

Step 4
Press in the frequency you would like to program, then hit “Pgm E” button when you done.

Step 5
Select “Edit Tag” by scrolling the knob at the top of the scanner one click clockwise, then press “Pgm E” button.

Step 6
Using the knob at the top of the scanner scroll thru the letters and stop on the one you want then hit the “6 >” button to add the next letter. (repeat this step on until complete) Once your done with your Text Tag then hit the “Pgm E” button

Step 6
Select “Set CTCSS/DCS ” by scrolling the knob at the top of the scanner one click clockwise, then press “Pgm E” button.

Step 7
You can select from the following CTCSS/DCS options

  • Off
  • CTCSS
  • DCS
  • CTCSS/DCS Search

If the frequency has a CTCSS or DCS you can program it here or you can Search for it.

Step 8
The other options in the menu you wouldn’t need to worry about when programming. You can now hit scan to start scanning. To add more frequencies repeat Steps 1 – 7.
—–

Programming Software
Programming software is available from Uniden and from BuTel software. Uniden Software will be very basic vs. the BuTel Software will more advanced. With the BuTel Software you will have capability to import frequencies from RadioReference.com with a paid Membership.

Product Test – Uniden Bearcat BC125AT

By Jonathan Higgins – The Scanner Expert

Product Tested: Uniden Bearcat BC125AT
Cost of product: $139.95

Out of the box
I’m very impressed with the Uniden Bearcat BC125AT, everything I could ask for in a basic analog conventional scanner. Alpha Tagging, PL Tone, NOAA Weather Alerts, and much, much more!

Once programmed, I had great reception inside of our Holliston office. The speaker audio quality was clear and crisp. Unit is pretty light weight even with the batteries installed.

This scanner will be ideal for someone that in area using analog conventional communications . Also great for auto racing, railroad buff or aviation hobbyist.

What makes this scanner different from BC72XLT and BC95XT?
Uniden added a lot of features, that are available in the XT models.

  • ALPHA Tagging – you can program a frequency and assign a name to the channel such as:
  • Private Line Tone (PL Tone) along with programming the frequency you can program CTCSS or DCS. If you’re not sure what the PL Tone is you can do a CTCSS/DCS Search. This is very helpful with blocking interference.
  • Bigger Memory – 500 channels, 10 banks, 50 channels per bank.
  • NOAA Weather Alert Mode
  • Narrowband Compatibles
  • Includes Military Air Band
  • Priority Scan with “do-not-disturb”
  • Close Call RF Capture with Do-Not-Disturb

    Design
    BC125AT is very handsome in it black and gray case, with its easy to press black and white buttons. Very compact and can fit in a shirt pocket without a problem. The display is much larger then BC346XT/BCD396XT, and super easy to read. Across the top of the scanner you have; multifunction knob at the top right, head set jack in the middle and BNC antenna connection on the left. Charging/ remote programming port on the right side. The back of the scanner you have the fixed belt clip and AA Alkaline/rechargeable battery compartment.

    Memory System
    Bank structured memory system with 500 channels, 10 banks with 50 channels per bank. The layout is very simple to understand for someone trying to field program the scanner.

    Band Coverage
    25-54 MHz
    108-174 MHz
    225-380 MHz
    400-512 MHz

    Service Searches
    Very simple to turn off and on Press “Func” then “Srch”. The services are broken down into banks and you can turn them on and off by press it number. Let’s say you want to turn off “CB Radio” press the “8” button to turn it off and to turn it back on just press the “8” again. To return to normal scanning press the “Scan” button.

    1. Police
    2. Fire/Emergency
    3. Ham Radio
    4. Marine
    5. Railroad
    6. Civil Air
    7. Military Air
    8. CB Radio
    9. FRS/GMRS/MURS
    0. Racing

    Custom Band Search
    Band Searches, press “Srch” button, you can set up to 10 custom search band limits. While in this mode press “Func” then “Pgm” then Select “Program Limits”. You will have a list of 10 custom search bank.

    Powering the Scanner
    Very much like IPhone/IPod, the BC125AT comes with a multipurpose USB cable. This cable can connect to the PC for programming and firmware updates. This cable powers the scanner via a USB AC or USB DC adapter (Sold Separately). Rechargeable batteries can be charged inside the unit.

    Programming Software
    Programming software will be available from Uniden and from BuTel software shortly. Uniden Software will be very basic vs. the BuTel Software will more advanced. With the BuTel Software you will have capability to import frequencies from RadioReference.com with a paid Membership.

    Weather “WX”
    This compact unit is great for monitoring NOAA Weather radio. You can also receive NOAA Weather Alerts while the scanner is scanning. Or you can run the scanner in Weather Alerts Standby mode. In this mode the BC125AT will act as weather station, audio will kick-in with weather alerts. To see all weather options on the scanner press “Func” then the “3 WX” button.


    In the Box

  • BC125AT
  • Rubber Duck Antenna
  • Multipurpose USB Cable

    Owners Manual
    (available online PDF)


    Recommend Optional Accessories
    Scanner Master is currently developing multiple carrying cases and we will keep you posted on that. We carry both optional AC USB and DC USB adapters, along with backup rechargeable batteries. We also have full line of portable antennas with BNC connections. If you plan on using the BC125AT in the home make sure you check out “Spectrum Force Desk Mount for One Portable Scanner“.

  • New Product – Uniden Bearcat BC125AT Scanner

    Product: Uniden Bearcat BC125AT Analog Conventional Scanner
    MSRP Price: $179.95
    Price: $139.95
    Note: Available first week in February!

    This scanner will not work in all areas, please check out sister site policescanners.net for compatibly.

    Bellow is product description provide by Paul Opitz Senior Product Manger @ Uniden


    BC125AT, 500 channels in 10 banks/50 channels per-bank, the BC125AT includes full VHF and UHF coverage (see the frequency chart below), including Air and Military Air channels, as well as full alpha tagging for all channels. PC programmability makes it simple to quickly program up for events such as air shows, auto racing, boat racing, and more.

    Close Call® RF Capture including Do-Not-Disturb makes capturing those unknown frequencies a snap. Plus, Uniden has extended the Do-Not-Disturb functionality to include Priority channels, so annoying interruptions from priority or Close Call checks is a thing of the past.

    The BC125AT includes all the feature enhancements you’ve come to expect from Uniden, including Temporary Lockout, CTCSS/DCS decoding, per-channel dropout delay, and complete search features, all in a compact, easy-to-carry chassis. Weather priority and weather alert will also keep you informed as to the latest weather and other hazard as announced by the National Weather Service.

    BC125AT Features:

    Memory Storage/Programming

    • 10 Channel Storage Banks – You can store up to 50 frequencies into each bank for a total of 500 frequencies so you can more easily identify calls.
    • PC Programming – you can download information into the scanner and control the scanner via your personal computer.
    • CTCSS and DCS Squelch Modes – rapid search for CTCSS/DCS tones/codes used during a transmission. You can identify up to 50 CTCSS tones and 104 DCS codes.
    • Direct Access – lets you directly access any channel.
    • Text Tagging – you can name each channel, using up to 16 characters per name.
    • Memory Backup – keeps the frequencies stored in memory for an extended time if the scanner loses power.
    • Key Confirmation Tones – You can turn on/off a tone that sounds when you perform an operation correctly or if you make an error.
    • Key Lock – lets you lock the scanner’s keys to help prevent accidental changes to the scanner’s programming.

    Close Call

    • Close Call RF Capture Technology – you can set the scanner so it detects
      and provides information about nearby radio transmissions
    • Close Call Do-Not-Disturb – checks for Close Call activity in between channel reception so active channels are not interrupted.
    • Close Call Temporary Store – temporarily stores and scans the last 10 Close Call hits in the ‘Close Call Hits’ system.

    Lock-Out Functions

    • Lock-Out Function – lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
    • Temporary Lockout – makes it easy to temporarily lock out any channel or frequency. The lockout is cleared when you turn power off, then back on so you don’t have to remember to unlock the channels later.

    Priority Functions

    • Priority Scan with Do Not Disturb – lets you program one channel in each bank (10 in all) and then have the scanner check each channel every 2 seconds while it scans the banks so you don’t miss transmissions on those channels. Do-Not Disturb keeps the scanner from interrupting transmissions during receiving.
    • Priority Plus Scan – you can set the scanner so it scans only the priority channels.

    Display

    • Display Backlight – You can turn on/off the LCD backlight, set it operate on squelch only, keypress only, or both.
    • Signal Strength Meter – shows the signal strength for more powerful transmissions.

    Antenna/Reception

    • Flexible Antenna with BNC Connector – provides adequate reception in strong signal areas and is designed to help prevent antenna breakage. Or, you can connect an external antenna for better reception.
    • Triple-Conversion Circuitry – virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.

    Service Banks/Searches

    • Service Banks – frequencies are preset in 10 separate Police, Fire/Emergency, Ham, Marine, Railroad, Civil Air, Military Air, CB Radio, FRS/GMRS/MURS, and Racing banks to make it easy to locate specific types of calls and search any or all of these banks.
    • Custom Search – lets you program up to 10 Custom Search Ranges and search any or all of these ranges.
    • Quick Search – allows you to enter a frequency and start searching up or down from that frequency.
    • Turbo Search – increases the search speed from 100 to 300 steps per second automatically for bands with 5 kHz steps.
    • Search Lockouts – you can lock up to 200 search frequencies: 100 temporary frequencies and 100 permanent frequencies in Custom Search, Service Search, Close Call Search, or Quick Search Modes.
    • Scan/Search Delay/Resume – controls whether the scanner pauses at the end of the transmission to wait for a reply. You can set the Delay time for each Channel, Close Call Search, Custom Search, and Service search. You can also set a negative delay where the scanner stops on transmissions for a set time then automatically resumes.

    Weather

    • Weather Alert Priority – the scanner scans active WX channels every 5 seconds to check for the presence of a 1050 Hz Weather Alert Tone.
    • Weather Alert Standby – the scanner allows you to monitor for weather alerts broadcast on NOAA channels.

    Power

    • Two Power Options – let you power the scanner using the included two AA rechargeable or alkaline batteries or the supplied USB cable.
    • Battery Save – works when there is no transmission for 1 minute in Scan Hold Mode and any Search Hold Mode (without Priority Scan). This feature turns off RF power for 1 second and turns on it for 300ms to extend the battery life.
    • Battery Low Alert – the icon will blink in the display and a tone warns you every 15 seconds when the battery power gets
    • Built-In Charger – allows you to charge Ni-MH batteries in the scanner using a USB port on any computer and the supplied USB cable.

    Frequency Coverage:
    25-54 MHz
    108-174 MHz
    225-380 MHz
    400-512 MHz

    New Product – ARC Patrol

    By Jonathan Higgins

    The Product: ARC Patrol Software
    Price: $29.95
    Works with: Uniden HomePatrol (HP-1)

    The Uniden HomePatrol comes with software but the software has some limitations:

    With ARC PATROL you expand the functionality of your HP-1:

  • Add a frequency that is not in the built-in database
  • Add a talkgroup that is not in the built-in database
  • Add a trunk system that is not in the built-in database
  • Add Nascar and other race frequencies
  • Change Alpha tags
  • Change or add subtones
  • Add Airband, CB, Marine, Railroad, FRS and GMRS frequencies
  • Change the service type of frequencies and/or talkgroups
  • Search a frequency range

    Links about the ARC Patrol:

  • Questions and Answers
  • Download the demo

    Introduction to the New BuTel ARC Patrol Software.
    Narrated By Gommert Buysen of Butel Software

  • New Product – GPS Accessory Kit

    By Jonathan Higgins

    Product Name: GPS Accessory Kit
    Cost: $19.95
    Available: Early October

    Included in this Kit:

  • Null Modem
  • Gender Changer
  • Uniden Serial cable
  • With the new GPS Accessory Kit you can hook up the following scanners to SpectrumForce GPS Receiver:

  • Uniden BC346XT
  • Uniden BCD396XT
  • Uniden BCD396T
  • Uniden BR330T
  • Uniden HomePatrol-1

  • The photo bellow shows the GPS Accessory Kit hook up to the SpectrumForce GPS Receiver.

    Scanner 101 – Uniden RH-96 Remote Head Hook Up



    The Uniden BC-RH96 Remote Head is
    only available from Scanner Master!

    Using the Uniden BC-RH96 Remote Head
    Are you installing a new Uniden base/mobile Scanner in your car or truck? Most new vehicles don’t have a lot of space for a bulky full size scanner, so the Uniden BC-RH96 Remote Head is the perfect fix to any instillation. With the Remote head you can place the scanner under the seat or mount it in the trunk. With the compact BC-RH96 Remote Head you can have full control** of the scanner with full display taking up 75% less space. If you’re installing the BCT15X or BCD996XT in your vehicle, make sure you check out the Uniden Bearcat BC-RH96 Remote Head.

    **Note:
    When powering down the remote head, it will not power down the scanner itself.
    Size:
    7.2W x 1.9D x 2.2H in inches (without knobs)

    Also In the box:
    Mounting bracket with Knobs
    10 foot data cable
    Cigarette lighter DC power plug
    The Owner’s Manual
    The Uniden BC-RH96 Remote Head works with the following Uniden Scanners:
    BCD996XT / BCD996T
    BCD396XT / BCD396T
    BCT15X/BCT15
    BC346XT
    BR330T

    Bring the Sound the Front
    When purchasing the Uniden BC-RH96 please check out our external speaker options available. You also need to bring the sound to the front along with the controls. The BC-RH96 does not have an internal speaker.
    Uniden 4” External Speaker – 10 foot cord
    RoadPro 2.75” External Speaker – 6 foot cord

    Simple 1,2,3 Remote head to Scanner Hook-Up
    Step 1
    Hook up the data cable to the scanner via the front PC Port.
    Step 2
    Hook up the data cable to the RH96 to the Remote port. This cable can be extended by using an optional 6 foot stereo extension cable or 25 foot stereo extension cable.
    Step 3
    Hook up your cigarette lighter power cord or using the optional Uniden Power Cable (it will plug directly into your fuse block).

    Installing Tips
    >> When placing the scanner in the trunk or under the seat make sure the scanner is in a location so will will not over heat. Try to avoid tight closed in spots.


    >> If you need to extended the 10 foot data cable that comes with the BC-RH96 you can purchase optional 6 foot stereo extension cable or 25 foot stereo extension cable. These cables can be use to extend the speaker cables as well.

    >> If your using multipliable cigarette lighter power cords you may want to purchase 12-Volt 3 Outlet Power Port Adapter.
    Programmable Function Buttons

    With the Uniden BC-RH96 you can program three function buttons.
    Options include:

  • Scan Key
  • Hold Key
  • Service Menu Shortcut
  • WX Scan Menu Shortcut
  • Goto Tone-out Standby Shortcut
  • Goto Close Call Only Mode Shortcut
  • and more!
    See the BC-RH96 Manual Pages 19- 21 for more details.

  • Optional Parts:

    External Speakers
    Uniden 4″ External Speaker
    Uniden 4″ Powered External Speaker
    Roadpro 2.75″ External Speaker

    Data and Speaker Extension Cables
    Stereo Extension Cable 6′
    Stereo Extension Cable 25′

    Power Options
    Uniden Power Cord (no cigarette adapter)
    Uniden Cigarette Lighter Charger Straight Cord – This already comes with RH96, if you need extra here is the part needed.

    Multi-port Mobile Outlet
    12-Volt 4 Outlet Platinum Series Power Port